Wisely Wealth ; M-W Pattern Scorer & Breakout Engine
Похожие материалы по тегам
Сообщите нам, если считаете, что материал размещён без разрешения.
Сообщить о материале
Обращение по товару «indicator wisely wealth ; m-w pattern scorer & breakout engine for tradingview.pine» отправится на рассмотрение. Укажите контакт для ответа и опишите причину.
О программе
Индикатор «Wisely Wealth ; M-W Pattern Scorer & Breakout Engine» предназначен для автоматического обнаружения на графике TradingView паттернов «двойная вершина» (Double Top) и «двойное дно» (Double Bottom). Для каждого найденного паттерна рассчитывается оценка качества от 0 до 100, основанная на четырёх факторах: соответствии цен пиков, RSI-дивергенции, объёмной дивергенции и высоте паттерна. Паттерны, набравшие оценку ниже заданного порога, не отображаются.
При формировании паттерна индикатор рисует линии вершин и линию шеи, а также отображает метку с оценкой и её детализацией. После пробоя шеи в сторону тренда автоматически строятся проекции Stop Loss, Take Profit 1 и Take Profit 2, которые динамически обновляются до момента достижения одной из целевых отметок или срабатывания стоп-лосса.
Встроенный фильтр тренда на основе EMA (по умолчанию 200 периодов) позволяет пропускать пробои, не совпадающие с макро-трендом. Доступны отдельные оповещения: формирование паттерна, пробой шеи, достижение TP1, достижение TP2 и срабатывание SL. Все визуальные элементы настраиваются по цвету и отображению.
Настройки программы
| Настройка | Описание |
|---|---|
| leftBars | Количество баров слева от текущей свечи, необходимых для подтверждения свинг-пивота. |
| rightBars | Количество баров справа от текущей свечи, необходимых для валидации свинг-пивота. Определение паттерна происходит после закрытия этого количества баров. |
| atrLength | Период расчёта индикатора Average True Range (ATR), используемого для допусков по цене, минимальной высоты паттерна и буфера стоп-лосса. |
| peakTolAtrMult | Максимально допустимая разница цен между двумя пиками или впадинами в единицах ATR. Чем меньше значение, тем строже требование совпадения уровней. |
| minBarsBetween | Минимальное количество баров между двумя пиками или впадинами, предотвращающее распознавание микроструктур. |
| maxBarsBetween | Максимально допустимое количество баров между двумя пиками или впадинами паттерна; более широкие структуры отфильтровываются. |
| minHeightAtrMult | Минимальная высота паттерна (от пика до линии шеи) в кратных значениях ATR. Обеспечивает значимость обнаруженной структуры. |
| minScoreThresh | Минимальная оценка качества паттерна от 0 до 100. Паттерны с оценкой ниже порога не отображаются и не генерируют сигналы. |
| rsiLength | Период расчёта индекса относительной силы (RSI), используемого для определения дивергенции между двумя пиками паттерна. |
| showScoreDetails | Включает отображение детализированной разбивки оценки (Price Match, RSI Div, Volume Div, Height) во всплывающей подсказке метки паттерна. |
| useTrendFilter | Включает фильтр направления тренда на основе EMA. При активном фильтре длинные пробои срабатывают только выше EMA, а короткие — только ниже EMA. |
| emaFilterLength | Период экспоненциальной скользящей средней (EMA), используемой в качестве фильтра макро-тренда. |
| slAtrBuffer | Дополнительный буфер в единицах ATR, добавляемый за пределы экстремальной вершины или впадины для размещения Stop Loss за пределами обычного шума. |
| maxWaitBreakout | Максимальное количество баров после формирования паттерна, в течение которых ожидается пробой шеи. Если пробой не произошёл, паттерн считается просроченным. |
| showTargets | Включает или отключает отображение линий и меток Stop Loss, Take Profit 1 и Take Profit 2 после пробоя паттерна. |
| targetLineLength | Начальная горизонтальная длина (в барах) линий проекции Stop Loss и Take Profit при отрисовке на графике. |
| colorTop | Цвет линий, маркеров и меток паттерна «двойная вершина» (Double Top). |
| colorBottom | Цвет линий, маркеров и меток паттерна «двойное дно» (Double Bottom). |
| colorNeckline | Цвет пунктирной линии шеи, соединяющей точку разворота с зоной пробоя. |
| colorTP1 | Цвет линии и метки первой цели Take Profit (1.0x высоты паттерна). |
| colorTP2 | Цвет линии и метки второй цели Take Profit (1.618x высоты паттерна). |
| colorSL | Цвет линии и метки уровня Stop Loss после пробоя паттерна. |
Поиск по коду файла
indicator("Wisely Wealth ; M-W Pattern Scorer & Breakout Engine", shorttitle="M-W Scorer", overlay=true, max_lines_count=500, max_labels_count=500)
leftBars = input.int(5, "Pivot Left Bars", minval=1, group="Pivot Detection Settings", tooltip="Number of bars to the left required to confirm a swing pivot. Higher values capture larger swings, while lower values detect faster, minor pivots.")
rightBars = input.int(5, "Pivot Right Bars", minval=1, group="Pivot Detection Settings", tooltip="Number of bars to the right needed to validate a pivot. Detection occurs after this number of bars closes, ensuring price confirmation.")
atrLength = input.int(14, "ATR Length", minval=1, group="ATR & Tolerance Settings", tooltip="Lookback period for Average True Range (ATR). Measures market volatility for peak tolerance, pattern height thresholds, and stop loss buffers.")
peakTolAtrMult = input.float(0.5, "Peak Matching Tolerance (ATR Mult)", minval=0.05, step=0.05, group="ATR & Tolerance Settings", tooltip="Maximum allowable price difference between the two peaks or valleys in ATR units. Closer peaks receive a higher quality score.")
minBarsBetween = input.int(5, "Min Bars Between Peaks", minval=2, group="Pattern Distance & Dimensions", tooltip="Minimum bar distance between Peak 1 and Peak 2. Prevents identifying micro-structures or adjacent duplicate candles.")
maxBarsBetween = input.int(60, "Max Bars Between Peaks", minval=3, group="Pattern Distance & Dimensions", tooltip="Maximum allowable bar span between the two peaks or valleys. Filters out overly wide or detached patterns.")
minHeightAtrMult = input.float(1.0, "Min Pattern Height (ATR Mult)", minval=0.1, step=0.1, group="Pattern Distance & Dimensions", tooltip="Minimum vertical distance from peak to neckline in ATR multiples. Ensures the pattern is large enough to represent a significant reversal.")
minScoreThresh = input.float(60.0, "Minimum Score Threshold", minval=0.0, maxval=100.0, step=5.0, group="Quality Scoring System (0 - 100)", tooltip="Minimum quality score (0-100) required to validate a pattern. Considers price matching, RSI divergence, volume divergence, and height.")
rsiLength = input.int(14, "RSI Length for Divergence", minval=1, group="Quality Scoring System (0 - 100)", tooltip="Lookback period for Relative Strength Index (RSI). Used to detect momentum divergence between Peak 1 and Peak 2.")
showScoreDetails = input.bool(true, "Show Score Breakdown in Tooltip", group="Quality Scoring System (0 - 100)", tooltip="Displays the detailed 4-factor scoring breakdown (Price Match, RSI Div, Volume Div, and Height) inside the pattern label tooltip on hover.")
useTrendFilter = input.bool(false, "Enable 200 EMA Trend Filter", group="Trend Filter", tooltip="Enables trend direction filtering. When active, Long breakouts only trigger above the EMA, and Short breakouts only trigger below the EMA.")
emaFilterLength = input.int(200, "EMA Filter Length", minval=1, group="Trend Filter", tooltip="Period for the Exponential Moving Average (EMA) macro trend filter. Typically set to 200 to align entries with broader market trends.")
slAtrBuffer = input.float(0.5, "Stop Loss ATR Buffer", minval=0.0, step=0.1, group="Risk & Targets", tooltip="ATR buffer added beyond the extreme peak or valley to place the Stop Loss safely outside normal market noise.")
maxWaitBreakout = input.int(50, "Max Bars Waiting for Breakout", minval=5, group="Risk & Targets", tooltip="Maximum bars allowed after pattern formation for price to break through the neckline before the pattern expires.")
showTargets = input.bool(true, "Show TP1, TP2 & SL Projections", group="Risk & Targets", tooltip="Toggles visualization of Stop Loss (SL), Take Profit 1 (TP1), and Take Profit 2 (TP2) projection lines and labels upon breakout.")
targetLineLength = input.int(15, "Target Projections Default Span", minval=3, group="Risk & Targets", tooltip="Initial horizontal bar length for plotting Stop Loss and Take Profit target lines on the chart.")
colorTop = input.color(#ef5350, "Double Top (Bearish) Color", group="Visual Styling", tooltip="Color used to draw Double Top lines, markers, and labels.")
colorBottom = input.color(#26a69a, "Double Bottom (Bullish) Color", group="Visual Styling", tooltip="Color used to draw Double Bottom lines, markers, and labels.")
colorNeckline = input.color(#ff9800, "Neckline Color", group="Visual Styling", tooltip="Color of the horizontal neckline connecting the pattern valley or peak to the breakout.")
colorTP1 = input.color(#00bcd4, "Take Profit 1 Color", group="Visual Styling", tooltip="Color for the Take Profit 1 (1.0x pattern height) target line and label.")
colorTP2 = input.color(#4caf50, "Take Profit 2 Color", group="Visual Styling", tooltip="Color for the Take Profit 2 (1.618x pattern height) target line and label.")
colorSL = input.color(#e91e63, "Stop Loss Color", group="Visual Styling", tooltip="Color for the Stop Loss level line and label.")
atrVal = ta.atr(atrLength)
rsiVal = ta.rsi(close, rsiLength)
trendMa = ta.ema(close, emaFilterLength)
plot(useTrendFilter ? trendMa : na, "200 EMA Trend Filter", color=color.new(color.orange, 20), linewidth=2)
type PivotPoint
int bar
float price
float rsi
float vol
float atr
type Pattern
bool isTop // true = Double Top (Bearish), false = Double Bottom (Bullish)
int p1_bar
float p1_price
int neck_bar
float neck_price
int p2_bar
float p2_price
float height
float score
float scoreMatch
float scoreRsi
float scoreVol
float scoreHeight
float sl
float tp1
float tp2
bool brokenOut
bool tp1Hit
bool slHit
bool completed
int breakout_bar
line l1
line l2
line lNeck
line lBreak
line lSL
line lTP1
line lTP2
label lblScore
label lblSL
label lblTP1
label lblTP2
f_newPattern(bool isTop, int p1_bar, float p1_price, int neck_bar, float neck_price, int p2_bar, float p2_price, float height, float score, float sMatch, float sRsi, float sVol, float sHeight, line l1, line l2, line lNeck, label lblScore) =>
Pattern.new(isTop, p1_bar, p1_price, neck_bar, neck_price, p2_bar, p2_price, height, score, sMatch, sRsi, sVol, sHeight, na, na, na, false, false, false, false, na, l1, l2, lNeck, na, na, na, na, lblScore, na, na, na)
var pivotHighs = array.new<PivotPoint>()
var pivotLows = array.new<PivotPoint>()
var activePatterns = array.new<Pattern>()
f_calcScore(bool isTop, float p1_price, float p2_price, float p1_rsi, float p2_rsi, float p1_vol, float p2_vol, float height, float atr, float maxTolerance) =>
float priceDiff = math.abs(p1_price - p2_price)
float matchRatio = math.max(0.0, 1.0 - (priceDiff / math.max(maxTolerance, 1e-6)))
float scoreMatch = matchRatio * 25.0
float scoreRsi = 0.0
if isTop
if p2_rsi < p1_rsi
float rsiDelta = p1_rsi - p2_rsi
scoreRsi := math.min(25.0, 10.0 + (rsiDelta / 15.0) * 15.0)
else
if p2_rsi > p1_rsi
float rsiDelta = p2_rsi - p1_rsi
scoreRsi := math.min(25.0, 10.0 + (rsiDelta / 15.0) * 15.0)
float scoreVol = 0.0
if p2_vol < p1_vol
float volDropRatio = (p1_vol - p2_vol) / math.max(p1_vol, 1.0)
scoreVol := math.min(25.0, 10.0 + math.min(volDropRatio, 1.0) * 15.0)
float scoreHeight = 0.0
float heightInAtr = height / math.max(atr, 1e-6)
if heightInAtr >= minHeightAtrMult
float excessRatio = (heightInAtr - minHeightAtrMult) / (minHeightAtrMult * 2.0)
scoreHeight := math.min(25.0, 10.0 + math.min(math.max(0.0, excessRatio), 1.0) * 15.0)
float totalScore = math.round(scoreMatch + scoreRsi + scoreVol + scoreHeight, 1)
[totalScore, scoreMatch, scoreRsi, scoreVol, scoreHeight]
ph = ta.pivothigh(high, leftBars, rightBars)
pl = ta.pivotlow(low, leftBars, rightBars)
bool patternFormedAlert = false
bool longBreakout = false
bool shortBreakout = false
bool tp1HitAlert = false
bool slHitAlert = false
if not na(ph)
int p2_bar = bar_index - rightBars
float p2_price = ph
float p2_rsi = rsiVal[rightBars]
float p2_vol = volume[rightBars]
float p2_atr = atrVal[rightBars]
int numPivots = array.size(pivotHighs)
if numPivots > 0
for i = numPivots - 1 to 0
PivotPoint p1 = array.get(pivotHighs, i)
int barsBetween = p2_bar - p1.bar
if barsBetween < minBarsBetween
continue
if barsBetween > maxBarsBetween
break
float maxAllowedDiff = p2_atr * peakTolAtrMult
float priceDiff = math.abs(p1.price - p2_price)
if priceDiff <= maxAllowedDiff
int offset2 = bar_index - p2_bar
int offset1 = bar_index - p1.bar
float neckPrice = 1e10
int neckBar = na
bool peakViolated = false
float highestAllowed = math.max(p1.price, p2_price) + (maxAllowedDiff * 0.5)
for b = offset2 + 1 to offset1 - 1
if low[b] < neckPrice
neckPrice := low[b]
neckBar := bar_index - b
if high[b] > highestAllowed
peakViolated := true
if not peakViolated and neckPrice < math.min(p1.price, p2_price) and not na(neckBar)
float patternHeight = math.max(p1.price, p2_price) - neckPrice
if patternHeight >= (p2_atr * minHeightAtrMult)
[totalScore, sMatch, sRsi, sVol, sHeight] = f_calcScore(true, p1.price, p2_price, p1.rsi, p2_rsi, p1.vol, p2_vol, patternHeight, p2_atr, maxAllowedDiff)
if totalScore >= minScoreThresh
patternFormedAlert := true
line l1 = line.new(p1.bar, p1.price, neckBar, neckPrice, color=colorTop, width=2)
line l2 = line.new(neckBar, neckPrice, p2_bar, p2_price, color=colorTop, width=2)
line lNeck = line.new(neckBar, neckPrice, bar_index, neckPrice, color=colorNeckline, style=line.style_dashed, width=1)
string tooltipText = showScoreDetails ? "Score Breakdown (Score: " + str.tostring(totalScore, "#.#") + "/100)\n" +
"• Price Match: " + str.tostring(sMatch, "#.#") + "/25\n" +
"• RSI Divergence: " + str.tostring(sRsi, "#.#") + "/25\n" +
"• Volume Divergence: " + str.tostring(sVol, "#.#") + "/25\n" +
"• Pattern Height: " + str.tostring(sHeight, "#.#") + "/25" : ""
label lblScore = label.new(p2_bar, p2_price, text="Double Top\n" + str.tostring(totalScore, "#") + " pts",
style=label.style_label_down, color=color.new(colorTop, 20), textcolor=color.white,
size=size.small, tooltip=tooltipText)
Pattern newPat = f_newPattern(true, p1.bar, p1.price, neckBar, neckPrice, p2_bar, p2_price, patternHeight, totalScore, sMatch, sRsi, sVol, sHeight, l1, l2, lNeck, lblScore)
array.push(activePatterns, newPat)
break // Formed pattern with closest valid peak
array.push(pivotHighs, PivotPoint.new(p2_bar, p2_price, p2_rsi, p2_vol, p2_atr))
if array.size(pivotHighs) > 40
array.shift(pivotHighs)
if not na(pl)
int p2_bar = bar_index - rightBars
float p2_price = pl
float p2_rsi = rsiVal[rightBars]
float p2_vol = volume[rightBars]
float p2_atr = atrVal[rightBars]
int numPivots = array.size(pivotLows)
if numPivots > 0
for i = numPivots - 1 to 0
PivotPoint p1 = array.get(pivotLows, i)
int barsBetween = p2_bar - p1.bar
if barsBetween < minBarsBetween
continue
if barsBetween > maxBarsBetween
break
float maxAllowedDiff = p2_atr * peaПоказано первые 50% кода (символов: 17273)